Set Up Nginx Load Balancing with SSL Termination

Rumi,

Nginx can be configured as a load balancer to distribute incoming traffic around several backend servers. SSL termination is the process that occurs on the load balancer which handles the SSL encryption/decryption so that traffic between the load balancer and backend servers is in HTTP. The backends must be secured by restricting access to the load balancer’s IP, which is explained later in this article.

Prerequisites
In this tutorial the commands must be run as the root user or as a user with sudo privileges. You can see how to set that up in the Users Tutorial.

The following guides can be used as reference:

  • Setting up a LAMP Server on Ubuntu 14.04
  • Setting up SSL on Nginx
  • Setting up Load Balancing on Nginx
  • A LAMP server is not required, but we’ll be using it as an example in this tutorial.

Setup
This tutorial makes use of the following 3 droplets:

Droplet 1 (Frontend)
Image: Ubuntu 14.04
Hostname: loadbalancer
Private IP: 10.130.227.33

Droplet 2 (Backend)
Image: Ubuntu 14.04
Hostname: web1
Private IP: 10.130.227.11

Droplet 3 (Backend)
Image: Ubuntu 14.04
Hostname: web2
Private IP: 10.130.227.22

Domain name – example.com

All these Droplets must have private networking enabled. Update and upgrade the software on all three servers:

apt-get update && apt-get upgrade -y

Reboot each server to apply the upgrades. This is important, since OpenSSL needs to be on its latest version to be secure. We will be setting up a new Nginx virtual host for the domain name with the upstream module load balancing the backends. Prior to setting up Nginx loadbalancing, you should have Nginx installed on your VPS. You can install it quickly with apt-get:

apt-get install nginx

On the two backend servers, update your repositories and install Apache:

apt-get install apache2

Install PHP on both backend servers:

apt-get install php5 libapache2-mod-php5 php5-mcrypt

For more information, see this article.

Generate Keys And Create An SSL Certificate
In this section, you will run through the steps needed to create an SSL certificate. This article explains in detail about SSL certificates on Nginx. Create the SSL certificate directory and switch to it.

mkdir -p /etc/nginx/ssl/example.com
cd /etc/nginx/ssl/example.com

Create a private key:

openssl genrsa -des3 -out server.key 2048

Remove its passphrase:

openssl rsa -in server.key -out server.key

Create a CSR (Certificate Signing Request):

openssl req -new -key server.key -out server.csr

Use this CSR to obtain a valid certificate from a certificate authority or generate a self-signed certificate with the following command.

openssl x509 -req -days 365 -in server.csr -signkey server.key -out server.crt

Once this is done this directory will contain the following files:

server.key – The private key
ca-certs.pem – A collection of your CA’s root and intermediate certificates. Only present if you obtained a valid certificate from a CA.
server.crt – The SSL certificate for your domain name

Virtual Host File And Upstream Module
Create a virtual hosts file inside the Nginx directory

nano /etc/nginx/sites-available/example.com

Add the upstream module containing the private IP addresses of the backend servers

upstream mywebapp1 {
 server 10.130.227.11;
 server 10.130.227.22;
}

Begin the server block after this line. This block contains the domain name, references to the upstream servers, and headers that should be passed to the backend.

server {
 listen 80;
 server_name example.com www.example.com;

location / {
 proxy_pass http://mywebapp1;
 proxy_set_header Host $host;
 proxy_set_header X-Real-IP $remote_addr;
 proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
 proxy_set_header X-Forwarded-Proto $scheme;
 }
}

The proxy_set_header directive is used to pass vital information about the request to the upstream servers. Save this file and create a symbolic link to the sites-enabled directory.

ln -s /etc/nginx/sites-available/example.com /etc/nginx/sites-enabled/example.com

Perform a configuration test to check for errors.

service nginx configtest

If no errors are displayed, reload the nginx service.

service nginx reload

Load balancing has now been configured for HTTP.

Enable SSL
Add the following directives to the virtual hosts file (/etc/nginx/sites-available/example.com) inside the server {} block. These lines will be shown in context in the next example.

listen 443 ssl;
ssl on;
ssl_certificate /etc/nginx/ssl/example.com/server.crt;
ssl_certificate_key /etc/nginx/ssl/example.com/server.key;
ssl_trusted_certificate /etc/nginx/ssl/example.com/ca-certs.pem;

Ignore the ssl_trusted_certificate directive if you are using self-signed certificates. Now the serverblock should look like this:

server {
 listen 80;
 listen 443 ssl;
 server_name example.com www.example.com;

ssl on;
 ssl_certificate /etc/nginx/ssl/example.com/server.crt;
 ssl_certificate_key /etc/nginx/ssl/example.com/server.key;
 ssl_trusted_certificate /etc/nginx/ssl/example.com/ca-certs.pem;

location / {
 proxy_pass http://mywebapp1;
 proxy_set_header Host $host;
 proxy_set_header X-Real-IP $remote_addr;
 proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
 proxy_set_header X-Forwarded-Proto $scheme;
 }
}

Check for configuration errors and reload the Nginx service.

service nginx configtest && service nginx reload

Securing The Backend Servers
Currently, the website hosted on the backend servers can be directly accessed by anyone who knows its public IP address. This can be prevented by configuring the web servers on the backends to listen only on the private interface. The steps to do this in Apache are as follows.

nano /etc/apache2/ports.conf

Find the following line:

Listen 80

Replace it with the backend server’s own private IP address:

Listen 10.130.227.22:80

Do this on all the backend servers and restart Apache.

service apache2 restart

The next step is to restrict HTTP access to the load balancer’s private IP. The following firewall rule achieves this.

iptables -I INPUT -m state --state NEW -p tcp --dport 80 ! -s 10.130.227.33 -j DROP

Replace the example with the load balancer’s private IP address and execute this rule on all the backend servers.

Testing The Setup
Create a PHP file on all the backend servers (web1 and web2 in this example). This is for testing and can be removed once the setup is complete.

nano /var/www/html/test.php

It should print the accessed domain name, the IP address of the server, the user’s IP address, and the accessed port.

<?php
 header( 'Content-Type: text/plain' );
 echo 'Host: ' . $_SERVER['HTTP_HOST'] . "\n";
 echo 'Remote Address: ' . $_SERVER['REMOTE_ADDR'] . "\n";
 echo 'X-Forwarded-For: ' . $_SERVER['HTTP_X_FORWARDED_FOR'] . "\n";
 echo 'X-Forwarded-Proto: ' . $_SERVER['HTTP_X_FORWARDED_PROTO'] . "\n";
 echo 'Server Address: ' . $_SERVER['SERVER_ADDR'] . "\n";
 echo 'Server Port: ' . $_SERVER['SERVER_PORT'] . "\n\n";
?>

Access this file several times with your browser or using curl. Use curl -k on self-signed certificate setups to make curl ignore SSL errors.

curl https://example.com/test.php https://example.com/test.php https://example.com/test.php

The output will be similar to the following.

Host: example.com
 Remote Address: 10.130.245.116
 X-Forwarded-For: 117.193.105.174
 X-Forwarded-Proto: https
 Server Address: 10.130.227.11
 Server Port: 80

Host: example.com
 Remote Address: 10.130.245.116
 X-Forwarded-For: 117.193.105.174
 X-Forwarded-Proto: https
 Server Address: 10.130.227.22
 Server Port: 80

Host: example.com
 Remote Address: 10.130.245.116
 X-Forwarded-For: 117.193.105.174
 X-Forwarded-Proto: https
 Server Address: 10.130.227.11
 Server Port: 80

Note that the Server Address changes on each request, indicating that a different server is responding to each request.

Hardening SSL Configuration
This section explains configuring SSL according to best practices to eliminate vulnerabilities with older ciphers and protocols. Individual lines are shown in this section and the complete configuration file is shown in the last section of this tutorial.

Enabling SSL session cache improves the performance of HTTPS websites. The following directives must be placed after ssl_trusted_certificate. They enable shared caching of size 20MB with a cache lifetime of 10 minutes.

ssl_session_cache shared:SSL:20m;
ssl_session_timeout 10m;

Specify the protocols and ciphers to be used in the SSL connection. Here we have omitted SSLv2 and disabled insecure ciphers like MD5 and DSS.

ssl_prefer_server_ciphers on;
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS;

Strict Transport Security instructs all supporting web browsers to use only HTTPS. Enable it with the add_header directive.

add_header Strict-Transport-Security "max-age=31536000";

Check for configuration errors and reload the Nginx service.

service nginx configtest && service nginx reload

Complete Configuration
After configuring and hardening SSL termination, the complete configuration file will look like this:

/etc/nginx/sites-available/example.com

upstream mywebapp1 {
 server 10.130.227.11;
 server 10.130.227.22;
}

server {
 listen 80;
 listen 443 ssl;
 server_name example.com www.emxaple.com;

ssl on;
 ssl_certificate /etc/nginx/ssl/example.com/server.crt;
 ssl_certificate_key /etc/nginx/ssl/example.com/server.key;
 ssl_trusted_certificate /etc/nginx/ssl/example.com/ca-certs.pem;

ssl_session_cache shared:SSL:20m;
 ssl_session_timeout 10m;

ssl_prefer_server_ciphers on;
 ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
 ssl_ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS;

add_header Strict-Transport-Security "max-age=31536000";

location / {
 proxy_pass http://mywebapp1;
 proxy_set_header Host $host;
 proxy_set_header X-Real-IP $remote_addr;
 proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
 proxy_set_header X-Forwarded-Proto $scheme;
 }
}

Do a SSL Server Test and this setup should get an A+ grade. Run the curl test again to check if everything is working properly.

curl https://example.com/test.php https://example.com/test.php https://example.com/test.php

Src:
https://www.digitalocean.com/community/tutorials/how-to-set-up-nginx-load-balancing-with-ssl-termination

Administrations Collected Articles Configurations (Linux) PKI

Leave a Reply

Your email address will not be published. Required fields are marked *