Install SmokePing on CentOS 7 Rumi, August 6, 2021August 7, 2021 This tutorial explains how to install Tobias Oetiker’s Smokeping into /opt/smokeping on a CentOS 7 box. Features of Smokeping: – Best of breed latency visualisation. – Interactive graph explorer. – Wide range of latency measurement plugins. – Master/Slave System for distributed measurement. – Highly configurable alerting system. – Live Latency Charts with the most ‘interesting’ graphs. – Free and open-source Software written in Perl written by Tobi Oetiker, the creator of MRTG and RRDtool Install Development Tools Load the development tools needed to compile smokeping. # yum groupinstall "Development tools" There are also dependencies that will install with these tools. Enable Epel repo You can install EPEL by running yum install epel-release. The package is included in the CentOS extras repository, enabled by default. # yum install epel-release Install packages Then install the following packages- # yum install perl httpd httpd-devel mod_fcgid rrdtool perl-CGI-SpeedyCGI fping rrdtool-perl perl-Sys-Syslog Add a few of the pre packaged CPAN modules # yum install perl-CPAN perl-local-lib perl-Time-HiRes Install smokeping Now download the latest smokeping package available at http://oss.oetiker.ch/smokeping/pub/ The current version at the time of the writing is 2.6.11 # cd /root # wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.11.tar.gz then extract it # tar xfz smokeping-2.6.11.tar.gz Install perl modules needed by smokeping # mkdir /opt/smokeping # cd smokeping-2.6.11/setup # ./build-perl-modules.sh # cd .. # cp -r thirdparty /opt/smokeping/ # ./configure --prefix=/opt/smokeping # make install Configure smokeping Then you will need to configure smokeping. Find below our sample config in form of a screenshot or download a sample config here. # vi /opt/smokeping/etc/config Hint: 10.0.1.251 is the IP of the smokeping host himself. Create your config from the default config delivered with smokeping and/or use our sample config. # cd /opt/smokeping/etc # cp config.dist config # cp /opt/smokeping/etc/basepage.html.dist /opt/smokeping/etc/basepage.html Create directories used by smokeping, copy some required files into the public web-directory and set rights for apache user if required. # mkdir /opt/smokeping/data # mkdir /opt/smokeping/var # mkdir /var/www/smokeping # mkdir /var/www/smokeping/cache # cp -R /opt/smokeping/htdocs/* /var/www/smokeping # mv /var/www/smokeping/smokeping.fcgi.dist /var/www/smokeping/smokeping.fcgi # chown -R apache:apache /var/www/smokeping Add a virtual apache directory by creating a file on /etc/httpd/conf.d/ with the name smokeping.conf. Add following content to it Alias /smokeping "/var/www/smokeping" <Directory /var/www/smokeping> Options Indexes FollowSymLinks MultiViews ExecCGI AllowOverride All Order allow,deny Allow from all DirectoryIndex smokeping.fcgi </Directory> Restart Apache # service httpd restart SELinux This guide expects SELinux has to be disabled, read following article about disabling SELinux. In case you change your SELinux settings: Make sure you have rebooted your machine to apply the changes. https://www.centos.org/docs/5/html/5.1/Deployment_Guide/sec-sel-enable-disable.html Run smokeping To test the installation, execute following command. # cd /opt/smokeping # ./bin/smokeping --config=/opt/smokeping/etc/config --debug To daemonize smokeping, execute following command: # cd /opt/smokeping # ./bin/smokeping --config=/opt/smokeping/etc/config --logfile=smoke.log Browse to: http://<your_ipaddress>/smokeping For additional resources have a visit at the authors website: – http://oss.oetiker.ch/smokeping/ Create smokeping systemd file\ vim /usr/lib/systemd/system/smokeping.service [Unit] Description=Smokeping Server After=network.target remote-fs.target nss-lookup.target [Service] Type=simple ExecStart=/opt/smokeping/bin/smokeping --nodaemon --config=/opt/smokeping/etc/config --logfile=/var/log/smokeping.log [Install] WantedBy=multi-user.target Restart Services (even during any updates in the config file- remember to restart both smokeping and httpd services) systemctl start smokeping && systemctl enable smokeping systemctl restart httpd Special Hint: In case your graphics for the last 3 hours didnt get updated but all the other timeframes are updated normaly, you may experience an error from the compiler. In this case please try to execute smokeping like this: # perl /opt/smokeping/bin/smokeping --config=/opt/smokeping/etc/config --logfile=smoke.log Issue while define ‘smokeping_secrets’ # chmod og-rw /usr/src/smokeping-2.3.6/etc/smokeping_secrets Src: How to install SmokePing on CentOS 7 https://smokeping-users.oetiker.narkive.com/DmlABgVP/issue-while-define-smokeping-secrets https://bidhankhatri.com.np/network/smokeping-2.7.3/ Related Administrations Collected Articles Configurations (Linux) CactiCentOS 7
Add a Static Route on CentOS May 30, 2019 To add a temporary route: ip route add 172.16.5.0/24 via 10.0.0.101 dev eth0 To make it persist system or network settings restart, create a route-ifname file for an interface through which the subnet is accessed, in this case eth0: nano /etc/sysconfig/network-scripts/route-eth0 Add the line with the network settings for the other subnet:… Read More
SSH Tunnel on PuTTY January 5, 2019 Most of you have probably used a tunnel with an SSH connection. What you probably weren’t aware of is that you can use a dynamic tunnel to access all remote infrastructure. Furthermore, you can specify a port and a destination IP to have direct access. This process is achieved through… Read More
Split large file and combine file in Linux August 6, 2019August 6, 2019 $ du -h Linux\ Security.mp4 Sample output: 1.1G Linux Security.mp4 As you see, the video file size is 1.1 GiB, which is very large to upload to my google drive. Even though, Google Drive lets users upload files up to 5TB in size, it is really time consuming process. With my low speed Internet… Read More
./bin/smokeping –config=/opt/smokeping/etc/config –debug ERROR: /opt/smokeping/etc/config, line 6: File ‘/usr/sbin/sendmail’ does not exist Reply
[root@smp smokeping]# ./bin/smokeping –config=/opt/smokeping/etc/config –debug ERROR: /opt/smokeping/etc/config, line 6: File ‘/usr/sbin/sendmail’ does not exist Reply