Alllow SNMP on Openfiler Rumi, June 6, 2014March 7, 2017 The first step to allow monitoring of the Openfiler server by SNMP is to edit the SNMP configuration file. In order to edit the configuration file perform the following steps :- Logon to the Openfiler server through SSH as an administrative user Navigate to the /etc/snmp folder Edit the snmpd.conf file and append the following to the bottom of the file :- rocommunity public com2sec local localhost {IP address of the monitoring server} com2sec network_l {Network address allowed to access the server}/24 group MyROGroup_1 v2c local group MyROGroup_1 v2c network_1 view all-mibs included .1 80 access MyROGroup_1 .. v1 noauth exact all-mibs none none access MyROGroup_2 .. v2c noauth exact all-mibs none none Save and exit the file Restart the SNMP service Once the snmpd.conf file has been modified restart the SNMP service by executing the command below :- service snmpd restart Confirm SNMP access from the monitoring server You can test if your snmp is working or not from your monitoring system using the snmpwak command: snmpwalk -v1 -c public <your openfiler server ip> If you see snmp is generating something on your console- the snmp isntallation is working properly. Related Configurations (Linux) OpenfilerSNMP
Endian Community (3.x)- network configuration using CLI- Netwizard February 20, 2019 After you login in you Endian Appliance, simply issue the following command: root@endian # netwizard You will be asked a couple of questions. If the network has already been configured, the current values are shown: simply press Enter if you want to keep that value. The snippet below shows some… Read More
Install Vesta Control Panel (vestacp) on Centos 7 with PHP-FPM and PHP 7.2 January 28, 2019 I had few issues on my container and KVM on installing vestacp. Issues were like quite weird, such as- Post installation on KVM- it moved into emergency maintenance mode Post installation on LXC container- DNS resolution halted After hours and hours of search, found few root causes- I have to… Read More
Installing Transmission Torrent Client on Debian June 10, 2020 Install transmission sudo apt-get install transmission-cli transmission-common transmission-daemon Configure There are many settings which can be configured. This how-to focus on tweaking the default configuration file for use with Debian/Ubuntu server. transmission-daemon will start automatically each time you start your server, with the settings defined in /var/lib/transmission-daemon/info/settings.json Make sure the… Read More